MAC OSX L2TP setup guide

Open System Preferences and go to the Network section.

Click the + button in the lower-left corner of the window.

Select VPN from the Interface drop-down menu.

Select L2TP from the VPN Type drop-down menu.

Enter anything you like for the Service Name.

Click Create.

For the Server Address, enter one of the following (depending on the content you want to view):

Next, enter your credentials. **Note – ALL CREDENTIALS ARE CASE SENSITIVE AND MUST BE ENTERED EXACTLY AS THEY ARE ON THE WELCOME EMAIL THAT YOU RECEIVED

Enter Your VPN Username for the Account Name.

Click the Authentication Settings button.

In the User Authentication section, select the Password radio button and enter Your VPN Password.

Select the ‘shared secret’ field and enter happiness

Click OK.

Check the Show VPN status in menu bar checkbox.

Important !
Click the Advanced button and make sure the ‘Send all traffic over VPN connection’ checkbox is selected.

Click OK to close the Advanced settings, and then click Apply to save the VPN connection information.

Click ‘connect’, and in a couple of seconds you should see the connection established.

You should now be able to browse as normal, and unblock content.

Common issues

1 If you see a login screen when browsing after connecting to the VPN, it’s likely that you didn’t complete step to ‘Send all traffic over VPN’ above

2  If you have connected to the USA server, but you are still seeing your local Netflix catalogue, it’s likely that you didn’t complete step to ‘Send all traffic over VPN’ above