To setup OpenVPN on your mac, you will need to download and install Tunnelblick, and then load a configuration file for each VPN connection that you want to setup. This should take 5 to 10 minutes to complete.

Install Tunnelblick

1) Open up a browser, and navigate to https://tunnelblick.net/downloads.html

2) Download the latest ‘stable’ build for the version of OSX that you are running (you can check the version by right clicking the apple icon in the top left hand corner of your screen, and selecting about this Mac)

3) Double click on the tunnelblick_xxxx_build_xxxx.dmg that you just downloaded file to start the installation. Double click the ‘tunnelblick’ icon in the next box,  and click OPEN on the pop-up dialogue box.

4) At this point you may be prompted to enter a password. This is the password that you use to unlock you Mac.

5) Click through the next 3 default answers 

You should now have tunnelblick installed, and be able to see the icon in your toolbar.

Install the OpenVPN config files.

Repeat the next steps for each VPN that you want to setup (we’re using USA as an example).

5) Download the VanishedVPN OpenVPN config file from here for the Server that you want (i.e. usa.ovpn for the USA VPN to watch US Netflix)

6) Double click on the downloaded file (it should be in your ‘downloads’ folder). This should open up Tunnelblick. Choose either ‘All users’ or ‘only me’ from the next screen (depending on if you share your machine, and  want to give other users access to the VPN).

You will be asked to enter your password again. This is the password that you use for unlocking your Mac.

You should now see a message saying ‘installation successful’

Connect.

You are now ready to connect to the VPN.

Move your mouse over the tunnelblick icon in your tool bar. You should see a box appear with the name of the VPN server that you downloaded the config for.

Click ‘connect’. A box will appear asking you for your username and password. Copy and paste your VPN credentials. Check the boxes ‘save in keychain’ to save having to enter these again.

Press OK.

You should see the connection box display some connectivity messages, and it will then go green when connected.

You should now be connected. To test the connectivity, check to see if you’re able to access content from the location that you are connected to (for example if you’re connected to the USA, you should see the US catalogue when you go to netflix.com).

If the VPN doesn’t connect, left click on the tunnelblick icon, and choose ‘VPN details’ where you can check the config, credentials, and setup automatic start at login etc.

Documents and support for Tunnelblick can be found here. 

https://tunnelblick.net/documents.htmlTo disconnect, left click the Tunnelblick icon, and select ‘disconnect’ .

The following is an example of working config kindly provided by a member of the VanishedVPN community.

In this example config is applied via command line. You should be reasonably tech savvy to be able to complete this, and leave yourself 30 mins > 1 hour to configure and test.

• Using the Web interface enable NTP and set the timezone, ensure the time on the device is correct.
• Log into the router using SSH.
• Install OpenVPN

opkg update
opkg install openvpn-openssl openvpn-easy-rsa luci-app-openvpn openssh-sftp-server

• Verify the packages/programs wget, scp and kmod-tun are installed, OpenVPN relies on the tun kernel module being installed – In theory opkg should have installed these dependencies.
• Move the /etc/easy-rsa directory to somewhere else, in case you do an upgrade and overwrite your files.

mkdir /etc/config/openvpn-config
mv /etc/easy-rsa/* /etc/config/openvpn-config/
rm -rf /etc/easy-rsa/
ln -s /etc/config/openvpn-config/ /etc/easy-rsa
rm /etc/config/openvpn_recipes
touch /etc/config/openvpn-config/client.ovpn

• Create a password file in /etc/openvpn eg usa.txt
• Put the username and password on two separate lines in the text file
• Edit the ovpn file from Vanished
• Add the password filename to the auth-user-pass line, e.g.: auth-user-pass usa.txt

cp usa.ovpn /etc/openvpn
chmod 400 /etc/openvpn/1300WebProDC.txt

• Create a tun interface for OpenVPN to use

cat >> /etc/config/network << EOF
config interface ‘Vanished_VPN'
    option proto 'none'
    option ifname 'tun0'
EOF

In the web interface add the tunnel interfaces (Tun0) to the Wan Zone 

Then Select WAN for the Zone 

• Save and Exit
• Go to System->Startup
• In the system startup command put

openvpn --cd /etc/openvpn --config /etc/openvpn/usa.ovpn

• Save and exit
• Reboot the router

——
Here is copies of some of our configs:
/etc/openvpn/usa.ovpn ——client

nobind

dev tun1

comp-lzo no

auth-user-pass usa.txt

resolv-retry infinite

persist-key

persist-tun

reneg-sec 0

verb 3

proto udp

tun-mtu 1200

remote usa.vanishedvpn.com 1194 udp

route-nopull 

script-security 2 

up /etc/openvpn/usa-up.sh

<ca>

—–BEGIN CERTIFICATE—–

MIIDNTCCAh2gAwIBAgIJAMQa+rPdk6lHMA0GCSqGSIb3DQEBCwUAMBYxFDASBgNV

BAMMC1ZhbmlzaGVkVlBOMB4XDTE2MTAyNzA3NTQwN1oXDTI2MTAyNTA3NTQwN1ow

FjEUMBIGA1UEAwwLVmFuaXNoZWRWUE4wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw

ggEKAoIBAQCarKifraPvg94Bfiy5EcHYnpAG6sUwvf4nH9YXQXXaNjz3uqRI+Pzs

03Z94ApLkzZm0jC1SyFbY6JxbqF5N87nw7PuWumamwr0VIOiu5ZeDgRMuxu5QK+c

w8AzrmZruPMdWIxUl5I9akC0Aucm1AcK0P3Ksd1VHWzox/ixJz42zJ0sTeIHjarp

IHsczCWc4VFk2K1D43F/HG9IXGusumwbOvY1HMQ/2qgN2q3FIuS9imLv0etApqMp

C4tDPQC5YWQSMhr0N2zjB5gsIgac5v+OIIr5VwLBTnmXYmCMfxG6E4TDQX3axc1x

Y0vB0w3r74u38iz2MNLF7xfH+/DY3N1fAgMBAAGjgYUwgYIwHQYDVR0OBBYEFJxs

VLWgp+toUyDtYNU9fmgyXyOEMEYGA1UdIwQ/MD2AFJxsVLWgp+toUyDtYNU9fmgy

XyOEoRqkGDAWMRQwEgYDVQQDDAtWYW5pc2hlZFZQToIJAMQa+rPdk6lHMAwGA1Ud

EwQFMAMBAf8wCwYDVR0PBAQDAgEGMA0GCSqGSIb3DQEBCwUAA4IBAQCJUHg1wrH2

X9AQGed2MJe02TKG3qnYQlHpAo0TnveyEBr0eEP5wsI4YvrMSw+NJL4jq/KYXmPJ

DARTJjDKRx/GxLm51AQRZJSFWQ00QxQ3mXskPZOsWN6pv13EUvxUdJ3f8N4kEIDA

rQ/+ssSxJuyFKIOp2Lyhc22oGfhwYp8CXbFkNRCCyQNk+MuKlZP8wFV46lewDysN

mh8lKCdHihyT6bdsOPG0jKQCB/y3jNBoscdpEHOdkQYFlW6Hd8xixP0e5yejVJXz

K9WyBPQXrswv0/3Blbv/BCFpIN5ObGnfLx2qO3S27uzNfVjWCTaWH85LkksiiTBY

1GmsvVD/8aCt

—–END CERTIFICATE—–

——

/etc/config/network 

——

config interface ‘Vanished_USA’

option proto ‘none’

option ifname ‘tun1’

option defaultroute ‘0’

option mtu ‘1200’

——

Our startup script:

——

#!/bin/ash

logger “OVPN: ifconfig_remote = $ifconfig_remote”

logger “OVPN: ifconfig_local = $ifconfig_local”

logger “OVPN: trusted_ip = $trusted_ip”

table=100

rule=”rule add from 10.1.2.0/24 priority 10 table $table”

route=”route add 10.1.2.0/24 dev $dev table $table”

route2=”route add default via $ifconfig_local dev $dev table $table”

logger “OVPN: ip $route”

logger “OVPN: ip $route2”

logger “OVPN: ip $rule”

ip $rule

ip $route

ip $route2

iptable1=”-I FORWARD -o $dev -j ACCEPT”

iptable2=”-t nat -I POSTROUTING -o $dev -j MASQUERADE”

iptable3=”-I FORWARD -i br-vanished -o eth0 -j ACCEPT”

logger “OVPN: iptables $iptable1”

logger “OVPN: iptables $iptable2”

logger “OVPN: iptables $iptable3”

iptables $iptable1

iptables $iptable2

iptables $iptable3

flush=”route flush cache”

logger “OVPN: ip $flush”

ip $flush

——

Save Password in OpenVPN for Automatic Login

By default, OpenVPN does not save the username and password which requires you to input them in each time you connect to the server. This is good from a security perspective, but there are sometimes where it is required to have this information saved to permit automatic logins to OpenVPN.
If you need to save the username and password to a VPN connection, follow the steps below.
Navigate to your config folder for OpenVPN. Some common paths for this folder are: Windows – C:\Program Files (x86)\OpenVPN\configLinux – /etc/openvpn

If you have a subfolder within the config folder where your configuration files/certs reside, make sure to dive down to that folder.
Create a new text file in this folder. We’ll name ours “auth.txt”. The contents of this text file should simply be two lines. The first line should be your username, and the second should be your password. Save this file. 

Now open your OpenVPN config file, which should be in the same folder, in a text editor (if on Windows use Notepad++ instead of Notepad). These files typically end in a .ovpn extension. Find the line that says “auth-user-pass” and change it to “auth-user-pass auth.txt”, where “auth.txt” is the name of the file containing your username and password. 
Save this file. 

Try to connect to OpenVPN. You may need to restart the OpenVPN client and you should now connect without a username and password prompt!

This setup will involve downloading the OpenVPN app and downloading and applying the VanisheVPN openVPN config files. It should take you around 5 > 10 minutes to setup.

1. Download and install the OpenVPN software from openvpn.net. Make sure to allow the TAP drivers to install when you receive the pop-up later on during the installation.

2. Download the VanishedVPN OpenVPN config file from here for the Server that you want (i.e. usa.ovpn for the USA VPN to watch US Netflix)

3. Move the file that you downloaded (USA.ovpn in our example) to your OpenVPN config folder at (C:\Program Files\OpenVPN\config). Click continue when asked for administrator access to continue.

4. Right click on the OpenVPN GUI shortcut icon on your desktop, and choose ‘run as administrator‘

5. Right click on the OpenVPN icon in the task bar at the bottom of your screen.

6. Select the connection that you want (USA in our example), and select ‘connect’ from the drop down menu.

7. Copy and paste your VPN username (your email address) and password that you can see on the ‘my account’ dashboard on our site. These are case sensitive.

8. The icon should turn green to show that you’re connected.

9. To test that you’re connected, try and play some content from the location that you are now connected to (for example if you are connected to USA, navigate to netflix.com and you should see the US catalogue).

NOTE – by default, the Windows OpenVPN client requires you to input your username / password each time you connect. If you would like to change this to save your credentials, follow the guide here.

Troubleshooting

 If OpenVPN does not connect as expected, ensure that:

1) Your username and password has been copied and pasted from your welcome email

2) When you run OpenVPN, you choose ‘run as administrator‘

If you know how to setup OpenVPN on your device, and just need the files you can download the VanishedVPN OpenVPN config file from the ‘my account / VPN config files’ section of our site here for the Server that you want (i.e. usa.ovpn for the USA VPN to watch US Netflix)

If you have a legacy account, which has not been moved to our new site yet, you can access the files here

The Image below shows a working config of OpenVPN running on a DD-WRT router (V24). 
Instructions.
Open a web browser, and navigate to the home screen of your DD-WRT router (192.168.1.1 by default)

1) Under SETUP/BASIC Setup go to the bottom of the screen and in the ‘time settings’ box, ensure that NTP CLIENT is enabled, and set to the correct time zone.

2 ) Navigate to  SERVICES / VPN,  and enter the config as shown in Fig 1 below. For this example, we have chosen the USA Server. You can enter any server from the list below depending on what Services you wish to use.

3) For this version of DD-WRT, there is no username / password box on the OpenVPN client screen, so it is necessary to add the following text to the ‘Additional Config’ field:

auth-user-pass /tmp/credentials.txt

If you are running a later version of DD-WRT that has a username / password box, simply enter your VPN credentials in there, and leave the ‘additional config blank

FIG1

4) Highlight the red text below and copy and paste in to the Ca Cert box on the DD-WRT screen.

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

Click ‘Apply settings’

For older versions which do not have a username / password field on the OpenVPN client screen,  it is also necessary to define the username and password as variables in the startup script (under Administration / Commands). Enter the following into the ‘Commands’ box, and then click ‘save startup’

#!/bin/sh
echo username > /tmp/credentials.txt
echo password >> /tmp/credentials.txt

Fig 2

5) Under Administration / Management , click the reboot router button

6) When the interface returns, you can check if the VPN is running by navigating to STATUS / OPENVPN

You should see ‘CONNECTED : SUCCESS’ in the ‘state’ box at the top of the screen. You may need to refresh this page if the connection is being established.

If you don’t see anything on the status screen, navigate back to SERVICES / VPN  and click on the apply settings button at the bottom of the page. Go back to the SERVICES / VPN page and check the status again. If you still don’t see ‘CONNECTED : SUCCESS’ in the ‘state’ box at the top of the screen, its time to double check that your config is correct, and try again.

7) Once you are successfully connected to the VPN, any device that you configure to use the IP address of this router as its ‘router’ or ‘gateway’ will be using the OpenVPN tunnel, and you should be able to access content from unblocked sites (i.e. US Netflix in the example above). To determine the IP address of your DD-WRT router navigate to STATUS / LAN and you will see the address under ‘IP Address’. In the example below the router IP address is 192.168.1.200

Instructions.

Open a web browser, and navigate to the home screen of your DD-WRT router (192.168.1.1 by default)

1) Under SETUP/BASIC SETUP go to the bottom of the screen and in the ‘time settings’ box, ensure that NTP CLIENT is enabled, and set to the correct time zone.

2) Navigate to  SERVICES / VPN,  and enter the config as shown in Fig 1 below. For this example, we have chosen the USA Server. You can enter any server from the list below depending on what Services you wish to use.

3) In the username & password fields, you should enter your VPN credentials (copy and paste as they are case sensitive).

If you don’t see a username and password field on this screen, then go to these instructions (which cover earlier versions of DD-WRT).

Fig1

4) Highlight the red text below and copy and paste in to the CA Cert box on the DD-WRT screen.

-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

Click ‘Apply settings’

5) Under Administration / Management , click the reboot router button

6) When the interface returns, you can check if the VPN is running by navigating to STATUS / OPENVPN

You should see ‘CONNECTED : SUCCESS’ in the ‘state’ box at the top of the screen. You may need to refresh this page if the connection is being established.

If you don’t see anything on the status screen, navigate back to SERVICES / VPN  and click on the apply settings button at the bottom of the page. Go back to the SERVICES / VPN page and check the status again. If you still don’t see ‘CONNECTED : SUCCESS’ in the ‘state’ box at the top of the screen, its time to double check that your config is correct, and try again.

7) Once you are successfully connected to the VPN, any device that you configure to use the IP address of this router as its ‘router’ or ‘gateway’ will be using the OpenVPN tunnel, and you should be able to access content from unblocked sites (i.e. US Netflix in the example above). To determine the IP address of your DD-WRT router navigate to STATUS / LAN and you will see the address under ‘IP Address’. In the example below the router IP address is 192.168.1.200

Once you have registered to be an affiliate, you will need to choose your preferred payment method so that we can pay you your commission. 

The affiliate home page shows you information about referrals and payments. 

From this page, click on ‘Profiles’ in the tool bar, and select ‘payment settings’ which will take you to the screen where you can choose how you would like to be paid (Bank or Paypal).

Once you have registered to be an affiliate, you will need to share your unique referral link with friends in order to start earning commission.

The affiliate home page shows you information about referrals and payments.

From this page, choose ‘marketing’ on the the toolbar, and select ‘affiliate links’ from the drop down.

On the affiliate links page, you will see your unique referral link. Anyone who clicks through this link, and then buys something on our site will generate up to 60% commission for you. Copy this link, and use it to share on social media, web sites, and direct messaging

The screen shot below shows an example of how you might want to use this link on Facebook. Once you share this type of post with your friends, anyone who clicks through and buys something will generate commission for you. You can check on the commission that you’ve earned on the affiliate home page

Our affiliate scheme rewards you for recommending us to your friends. Simply click to join our affiliate scheme, and you will be given a link which you can share with your friends on social media or by message, and when they buy a subscription , you will receive a payment. 

The commission for sign ups is staggered, and increases with the more people who sign up via your link:

1-49  = 40%

50-99 = 50%

100 > = 60%

To sign up click on the affiliate link on the main menu bar of our site, or if you are a subscriber already, you can click through the affiliate link on the left hand menu bar in the ‘my account’ section of our site.

Once you’re signed up, just get your referral link, and start earning commission